Industrial water purifier with a capacity of 120 cubic meters

The technical specifications of this industrial water purifier (water purifier with a capacity of 120 cubic meters) are as follows:
A pressure tank (FRP) that is used as a sand-carbon filter with a size of 72*24 inches to remove larger particles, odor, taste and excess chlorine from the water.
Three micron filters with dimensions of 4.5*20 inches to remove particles larger than 5 microns
Three ultrafiltration (UF) filters with the brand HM-200 with a capacity of 4 cubic meters are used in the device to remove smaller particles and microorganisms and increase the life of the RO membrane filters.
A high-pressure pump with the brand LOWARA made in Italy with a maximum working pressure of 14 bars is installed in this water purifier to provide the necessary pressure for the system.
One 4-element 8-inch pressure vessel with the Foniter brand for placing the RO membrane inside it
Four original 8-inch American single-film membrane filters, model BW30-400PRO, for water purification operations
One RO Controller, model ROC2315, for controlling the device with the ability to display the TDS of the product water
One high and low pressure controller with the Danfoss brand
Two 25bar analog steel oil pressure gauges
Two 20GPM flow meters to display the product and wastewater flow rate of the device
One anti-scalant injection system including a PENTAIR brand dosing pump with specifications of 5 liters, 5 bars and a 50-liter polyethylene tank
Has a CIP system including a LOWARA brand pump from Italy and a 100-liter polyethylene tank
Electrical panel with standard parts in industrial water purification devices
High pressure piping made of stainless steel and low pressure made of UPVC
The chassis of this industrial water purification device is made of steel with epoxy coating